$399.00
Improves alignment capability and provides more pos...
$29.00
P/N 260-1087 Replace your loose, worn, or damaged b...
$17.97
P/N 619-1312 Keeps springs from bottoming out Imper...
$249.97
P/N 103-3064-HRN Replace your worn out, sagging, or...

Customizations Total: $0.00

$1,999.00
P/N CO-100001 Dramatically improve handling, steeri...
$29.00
P/N 267-1291 Replace your cracked, worn out, or dam...
$49.97
P/N:  267-5351 Improves steering response Allows +...
$169.97
P/N 601-0503 Limits engine travel Poly lock feature...
$3,799.00
P/N IFS-1710 Lose up to 60 pounds of unsprung weigh...
The standard finish is raw with no painting or coating. We highly recommend a powder coated finish for long term durability and protection against corrosion.
These laser cut and CNC formed sheet metal pieces fill the gap left by the mounting rail to make the whole IFS transparent to onlookers. This is the finishing touch to make the installed system look as one with the underside of the vehicle.
The IFS comes standard with manual steering...which can be difficult to turn in tight parking or load speed driving situations. The power steering option includes: new power rack & pinion, new GM type II power steering pump, integrated reservoir, custom powder-coated bracket, pulley, hard lines with correct fittings, braided stainless high pressure line with AN fittings assembled, silicone low pressure return line with clamps, all necessary hardware, and machined spacers
This high temperature synthetic power steering fluid will prevent foaming and pump cavitation, common with mineral based power steering fluid. This fluid is used by top autocrossers, road racers, and drag racers because it works so well.
Wilwood brakes are required with this IFS system and requires 15" diameter or larger wheels. This Wilwood front disc brake kit includes 12" standard or drilled and slotted rotors, 6-piston calipers (red or black), aluminum master cylinder, proportioning valve, and braided stainless D.O.T. approved brake hose
This Wilwood rear disc brake kit converts your drum brakes to rear disc brakes. It is NOT required to use the IFS suspension system but will match your front Wilwood kit (which is required when using the IFS system). It requires 15" diameter or larger wheels. This Wilwood rear disc brake kit includes an integrated parking brake, 12" standard or drilled and slotted rotors, 4-piston calipers (red or black), parking brake cable, and braided stainless D.O.T. approved brake hose.
You'll need new brake fluid and this fluid is the absolute best. D.O.T. 5.1 brake fluid is compatible with D.O.T. 3 & 4 fluids, has low compression with a high boiling point. This fluid is made in Europe and helps prevent brake fade (especially during track use).

Customizations Total: $0.00

$69.97
P/N 601-1008 Improves handling, the effectiveness o...
$357.97
P/N 103-7077 Replace your worn out, sagging, or da...

Customizations Total: $0.00

$1,949.00
P/N RS-1475 Control Freak Suspensions' 4-Link Coil-...
You must specify which rear end you have...as they are built to order. Welding will be required to the inner frame rail.

Customizations Total: $0.00

$29.97
P/N 619-0001 Replace your cracked, worn out, or dam...
$119.97
P/N:  5054 The KYB Gas-a-Just monotube shock absorbe...
$39.97
P/N 274-9054 Improves handling, the effectiveness o...
$34.97
P/N 606-1205 Improves handling, the effectiveness o...
$79.97
P/N 274-9044 Improves handling, the effectiveness o...
$229.00
P/N ACC-1820 Release hidden horsepower to the grou...
$19.97
P/N 601-1120 Improves handling, the effectiveness...
$19.97
601-1121 Improves handling, the effectiveness of OE...
$29.97
P/N 909-502 Improves handling, the effectiveness of...
$229.87
P/N 102-0866 Improve handling & reduce body rol...
$189.87
P/N 102-0913 Improve handling & reduce body rol...