1970-1988 AMC Prothane Front Upper Control Arm Bump Stop Kit
- P/N 19-1312-BL - Black
- Keeps springs from bottoming out
- Impervious to gas and oil and will not rot or deteriorate
- Available in black
- Made in the USA
- Limited lifetime manufacturer warranty
- Kit Box Dimensions: 3.8 x 3.2 x 2.7 inches
All bump stops are designed to protect your suspension from serious impacts. Some vehicles come with bump stops pre-installed. However, these OE bump stops are usually made of rubber. While rubber is good for absorbing and re-directing impacts, it doesn't last long. Prone to cracking, rotting, and eventually falling away, rubber bump stops will eventually leave your suspension completely exposed. Prothane crafts all of their bump stops with high-quality polyurethane, a material tested and proven to be much more durable and dependable than OE rubber. Once you install Prothane's wear and contamination resistant bump stops, you won't have to worry about your suspension's security again.
|AMC, American Motors, Rambler|
- Kit includes
- 2 of Front Upper Control Arm Bump Stops - 67021
- 2 of Flat Washers - 41 (3/8 inch)
- 2 of Nylon Lock Nuts - 1125 (3/8-16)
Production vehicles are built using rubber bushings in control arms, strut arms, leaf springs, body mounts, motor mounts, transmission mounts, sway bars and shocks. Additionally, rubber components can be found as coil spring pads, leaf spring pads and suspension bump stops. While rubber components offer a soft side, for typical driving conditions, they tend to deteriorate rapidly from exposure to the elements. This contributes to premature component failure, resulting in a “spongy” ride and loss of performance handling. Urethane is impervious to gas and oil and will not rot and is stronger that rubber.
Improved Handling and Performance
Due to the firmness of our specially formulated urethane, vehicle owners that have upgraded to PROTHANE Total Kits and Components have experienced better handling, cornering and a firmer suspension feel. PROTHANE a “must” upgrade for High Performance vehicles where improved performance and durability are desired.
Installation Made Easy
PROTHANE products are made to exact specifications and are direct replacements for original rubber bushings and components. No special tools are required, standard tools and equipment replace factory units.
PROTHANE Products are cast in RED and BLACK urethane. The Hardness/Durometer are identical for both colors is the same and there is no difference in performance. Color is a matter of preference. All part numbers are RED urethane products. Part numbers followed by BL indicate black urethane.
PROTHANE™ has a complete shell program for most popular applications. Many of our control arm bushing kits comes complete with new shells. However, in some applications, the original metal shells will needed to be reused.
PROTHANE Super Grease™ eliminates squeaking that may occur if not applied. Super Grease™ contains versatile waterproof, non-melting Teflon® specially formulated for urethane to seal out water and lubricate under the most adverse conditions. It provides superior adhering and extreme pressure qualities for optimum no- squeak performance. All kits come complete with instructions and an ample supply of PROTHANE Super Grease™