$66.97
P/N:  JFV6701 Overflow tubes handle excess fuel wh...
$18.97
P/N:  9856 This fuel pump block-off plate is manuf...
$43.97
P/N: M6737 Carter muscle car mechanical fuel pumps ...
$76.97
P/N:  M5056 Carter muscle car mechanical fuel pumps...
$19.97
P/N 86086 Patented design prevents overspills One-...
$5.97
P/N EPC-17B Replaces rusty, leaking, or damaged stee...
$19.97
P/N:  AMC8280 American Performance's high-temp RTV o...
$37.97
P/N:  9039 American Performance's intake manifold ga...
$20.97
P/N: 317-3089  Replacement for OE 12-bolt different...
$1.97
P/N: AMC-J3187543 Thermostat Housing Gasket, fits en...
$30.97
P/N 57904 Red Line's 75W90 Synthetic Gear Oil is the...
$28.97
P/N:  101-0063 Patterned after the original Replace...
$38.97
P/N:  101-0070 Patterned after the original Replace...
$6.97
SC-101 Patterned after the original Replaces your r...
$257.97
P/N AMC-7170 Creates a stable ground system, elimin...
$16.97
P/N AMC-40084 Replaces cracked, burned, or damaged ...
$16.97
P/N AMC-40085 Replaces cracked, burned, or damaged ...
$8.97
P/N: 101-0716 Replaces your worn out, missing, or l...
$34.97
P/N: H-1922 Replace your leaking, rusty, or broken ...
$89.97
P/N: H-1920 Replace your leaking, rusty, or broken ...
$7.97
P/N 400-0256 Replaces worn, cracked, damaged, or mi...
$13.97
P/N 360-381 Replaces worn, cracked, damaged, or mis...
$54.97
P/N:  HIC-734 Patterned after original Replaces tor...
$66.97
P/N:  HIC-728 Patterned after original Replaces tor...
$66.97
P/N:  HIC-732 Patterned after original Replaces tor...
$49.97
P/N HPK Add racing styling & functionality to y...
$29.97
P/N: HR-47 AMERICAN MOTORS AMBASSADOR 1967-1974 ...
$11.97
P/N:  C25B7 Patterned after an original radiator ho...
$37.97
P/N:  3851 Patterned after originals radiator hose ...
$42.97
P/N:  5597 Patterned after originals lower radiator...
$37.97
P/N 267-5195 Replace your worn out or damaged idler...
$209.97
P/N 268-3502 Replace your loose, worn, or damaged c...
$3,999.00
P/N IFS-1690 Lose up to 60 pounds of unsprung weigh...
The standard finish is raw with no painting or coating. We highly recommend a powder coated finish for long term durability and protection against corrosion.
These laser cut and CNC formed sheet metal pieces fill the gap left by the mounting rail to make the whole IFS transparent to onlookers. This is the finishing touch to make the installed system look as one with the underside of the vehicle.
The IFS comes standard with manual steering...which can be difficult to turn in tight parking or load speed driving situations. The power steering option includes: new power rack & pinion, new GM type II power steering pump, integrated reservoir, custom powder-coated bracket, pulley, hard lines with correct fittings, braided stainless high pressure line with AN fittings assembled, silicone low pressure return line with clamps, all necessary hardware, and machined spacers
This high temperature synthetic power steering fluid will prevent foaming and pump cavitation, common with mineral based power steering fluid. This fluid is used by top autocrossers, road racers, and drag racers because it works so well.
The standard IFS does not include a front sway bar. Adding the sway bar will help reduce body roll, improve high speed cornering capability and overall stability.
Wilwood brakes are required with this IFS system and requires 15" diameter or larger wheels. This Wilwood front disc brake kit includes 12" standard or drilled and slotted rotors, 6-piston calipers (red or black), aluminum master cylinder, proportioning valve, and braided stainless D.O.T. approved brake hose
This Wilwood rear disc brake kit converts your drum brakes to rear disc brakes. It is NOT required to use the IFS suspension system but will match your front Wilwood kit (which is required when using the IFS system). It requires 15" diameter or larger wheels. This Wilwood rear disc brake kit includes an integrated parking brake, 12" standard or drilled and slotted rotors, 4-piston calipers (red or black), parking brake cable, and braided stainless D.O.T. approved brake hose.
You'll need new brake fluid and this fluid is the absolute best. D.O.T. 5.1 brake fluid is compatible with D.O.T. 3 & 4 fluids, has low compression with a high boiling point. This fluid is made in Europe and helps prevent brake fade (especially during track use).
This IFS system requires an aftermarket Canton 8-quart road racing style oil pan (8" deep) and oil pump pickup for clearance or the IFS system will NOT fit. Some minor adapting and fitting of the oil pan and pickup may be required.

Customizations Total: $0.00

$31.97
P/N AMC-CCC Dress up your engine with our show-qual...
$119.97
P/N AMC-964829217C Dress up your engine with our sh...
$98.97
 Our 45,000-volt coils feature a very low resistance...
$32.97
P/N: INSTALLATION-KIT1 A MUST have for the DIY inst...
$312.97
P/N: INSTALLATION-KIT2 A MUST have for the DIY inst...
$12.97
P/N DR0039 Want to take your restoration to the next...
$119.97
P/N:  350-2532L Replace your faded, cracked, or non...
$68.97
P/N:  363-6746 Replace your faded, cracked, or non-...
$68.97
P/N:  363-6748 Replace your faded, cracked, or non-...
$13.97
P/N 80301 Red Line differential friction modifier an...
$105.97
P/N:  400-4965 Features:   Made like the factory...
$223.97
P/N: 319-3815 Reproduction replacement for your fad...
$306.97
P/N: 319-3815K Patterned after originals for your f...