1970-1983 AMC Front Coil Spring Set - Limited Lifetime Warranty



P/N APP3112
  • Replace your worn out, sagging, or damaged front coil springs to prevent uneven tire wear due to vehicle misalignment.
  • Powder-coated to protect against corrosion
  • Designed to lower stresses for longer service life
  • All coil springs are 100% load tested
  • Shipping Dimensions:  19"x16"x8
  • Sold As:  Set
  • Warranty:  Limited Lifetime Manufacturer
AMC, American Motors, Rambler
Models Years
Concord w/or w/o AC 1978-1983
Gremlin w/or w/o AC 1970-1978
Hornet w/AC 1970-1972
Hornet w/o AC 1973-1977
Javelin 304 w/o AC 1970
Javelin V-8 w/or w/o A/C 1971-1974
Javelin AMX w/or w/o AC 1971-1974
Matador Inline 6 w/AC 1972-1973
Matador inline 6 w/o AC 1973
Rebel 1970
Spirit 304 1979-1983
Spirit DL Inline 6 Auto w/AC 1981-1982
Spirit GT w/AC 1983


Designed to be more than OE replacements, our coil springs come with a variety of shapes and ends. While they are certainly higher quality than the OE springs, each of our coil springs were designed to still have the same spring rate. Having the same spring rate allows for an easier install and a more accurate restoration for your AMC's ride.

Constant Rate coil springs return your AMC to the original specifications. The rate at which the spring compresses and rebounds remains constant regardless of the amount of load on the spring. These coil springs are heat treated, have a weather resistant finish and use a urethane protective tube.

Coil Springs have three types of ends: Square, Tangential and Pigtail. It is important that you select a coil spring that matches BOTH your end types, otherwise the coil spring won't fit. Your OE coil spring could have the same type ends, or a combination of both.

With a Squared end, the final coil is bent back to touch the coil before it. The easiest way to know if you have a squared end is to stand the coil spring straight up. A squared end will let the spring sit flat on the ground and stay standing.

A Tangential end looks like it would just keep on going forever if the spring continued. The last coil is not bent back and it is not the pigtail (see below). Instead, the tangential coil spring looks as though a normal coil was just cut, otherwise it would have kept winding on forever. If you tried to stand it up straight, it would fall.

The Pigtail is probably the easiest to identify. Its defining characteristic is the pig tail shape at the end. The final coil is squared off, but is a much smaller diameter than the rest of the spring.