American Performance Products • 675 S. Industry Rd • Cocoa, FL 32926
Phone: 1-321-632-8299 • Fax: 1-321-632-5119 • Monday - Thursday 8AM - 5:30PM (EST) • Closed Friday
AMC LIVES!
nnn

American Performance Products
675 S. Industry Rd
Cocoa, FL 32926
321-632-8299
Fax: 321-632-5119

M-Th 8-5:30 EST
Closed Friday


30+Yrs In Business
No Hassle Returns
Low Price Guarantee
Largest Selection

If You Don't See It, CALL!
We stock over 3,000 products for your AMC, Rambler & Jeep. Check back often...we're adding new & exciting products all the time. We're your 1 stop AMC shop!






New Products
Please call 1-321-632-8299 or e-mail us for latest information and pricing

NOTE: We stock thousands of AMC parts, this is just a small sample of our inventory.

Latest New Products!
     
     
 
 
 
 
 
 

FiTech GoStreet EFI Conversion Kit - Finally...a simple bolt-on EFI conversion kit that brings your AMC V-8 into the 21st century. In less than one day, you'll enjoy instant starts, crisp throttle response, better mileage, and more power. You'll eliminate hard starts, sputtering, stalling, heat soak, vapor lock, and re-tuning for different climates & altitudes. After installation, you can drive your AMC ANYWHERE with excellent drivability and reliability...even after long term storage. Systems are available to support up to 400HP & 600HP Normally Aspirated or 600HP Power Adder (Nitrous, Turbo, or Supercharger Up To 25 PSI).

Because Go Street EFI uses GM style sensors, you'll be able to get service parts at any major auto parts store. The innovative Fuel Command Center option adds an in-tank style fuel pump in your engine compartment so you don't have to modify your stock fuel tank. Plus, Fuel Command Center delivers better performance & reliability than with in-line fuel pumps because it eliminates the possibility of heat soak. The best part is it looks just like a carburetor so you can keep your factory air cleaner & intake manifold.

Go Street EFI - 400HP, Satin Finish - Naturally Aspirated Only

Go Street EFI - 600HP, Bright or Black - Naturally Aspirated Only

Go Street EFI - 600HP Power Adder, Bright Or Black - Supports Nitrous or 25PSI Turbos or Superchargers

 
  • Replaces Your 4-Barrel Carburetor With Modern Fuel Injection
  • Lightweight Cast Aluminum Design w/Throttle Body Mounted Sensors & Computer
  • Works With Factory & Aftermarket 4-Barrel Intake Manifolds & Air Cleaners w/Flat Base
  • Instant Starting & Crisp Throttle Response, All Season / Climate Drivability
  • Eliminates Cold Start Warmups, Hard Starting, Sputtering, Vapor Lock, & Fuel Smell In The Interior
  • Pre-Programmed & Self Tunes Right Out Of The Box
  • Simple Tach Input Reads Signal From Coil, HEI, MSD/CDI Ignitions
  • ECU Is Mounted On Throttle Body, No Hole To Drill In Your Firewall & No Harness Draped Over Your Engine
  • ECU Features Voltage Control Fuel Pump Control (Reduces Voltage To The Pump Under Low Load Conditions Such As Idle & Cruise Reducing Noise & Heat)
  • Annular Discharge Design Provides Complete Fuel Atomization
  • Fits Throttle & Trans Linkage That Fits 4150 Holley Carburetor
  • GM Style Sensors Which Can Be Replaced At Any Major Auto Parts Store
  • AC Input For Idle Compensation & 1 Electric Fan Control
  • Works With All Regular & Ethanol Blend Pump Fuels
  • Includes Cast Aluminum Throttle Body Drilled For Square Bore & Quadrajet Intakes, Fuel Rails w/-06AN Fuel Inlet Fitting, Flow Matched 55-Lb./Hour Fuel Injectors, ECM With Calibration Module & On Board Fuel Pump Driver & OBD-II Style Diagnostics, Handheld Touch Screen Controller w/Windshield Mount, Plug N Play Wiring Harness, Bosch 4.2 Wide Band 02 Sensor & Clamp On 02 Bung Kit, Fuel Pressure Regulator, GM Type MAP Sensor, GM Type TPS Sensor, GM Type IAC Motor, GM Type Coolant Temperature Sensor, GM Type Adjustable Control Fan Switch, Gasket Kit, Step By Step Instructions
  • Installs In Approximately 1 Day With Basic Hand Tools
  • 1-Year Parts Warranty, Lifeime Warranty On ECU
  • NOTE: Requires Separate Fuel Command Center Purchase Below. Power Adder Only Features - Spark/Timing Control When Distributor's Advanced Mechanism Is Locked, Boost Ready Throttle Body, 2.5 Bar MAP Sensor Supports Up To 25 PSI, Nitrous Control, Boost & Timing Retard Strategies, 2 Fan Control (Can Be Set At Different Temps), A/C Idle Speed Input Kick Up, Advanced Hand Held Tuning Mode Enabled, Pro Laptop Software (For Professional Tuners With A Chassis Dyno)
 

FiTech Fuel Command Center EFI Electric Fuel Pump Conversion - The FiTech Fuel Command Center Assembly is mounted in your engine compartment. It can also be mounted anywhere on the AMC's chassis if necessary. The conventional fuel line that originally went to your carburetor is connected to the "IN" port of the Fuel Command Center. A supplied high pressure hose is plumbed from the Command Center to the inlet port on your EFI throttle body.

Your stock carbureted fuel pump (or a TBI low pressure EFI pump) feeds low pressure fuel to the FiTech Fuel Command Center’s sump tank.

A reservoir of fuel is in the sump tank at all times so the 340 L/PH pump inside is submerged in fuel. The sump tank contains a float that automatically shuts off the fuel coming into the Sump Tank when the correct fuel level is reached. At that point the stock pump is dead heading against the Fuel Command Center just like it normally would against a fuel pressure regulator.

When the engine is running the Fuel Command Center pump supplies high pressure (58 PSI) fuel to the EFI throttle body.

   
  • All The Benefits Of An In-Tank Fuel Pump Without Modifying Your Fuel Tank
  • Eliminates Rigging Costly EFI Quality Inlet & Return Lines For Your Fuel System
  • Works With Any FiTech EFI System, Any Competitive Aftermarket Or Factory EFI Installation
  • Submerges A High Volume Electric Fuel Pump So It Runs Quieter Without Possibility Of Fuel Starvation
  • External Inline Pumps Are Designed To Push Fuel But Do A Poor Job Of Sucking Fuel. So, If The EFI Pump Is Not Mounted Lower Than The Tank, It May Suffer Fuel Starvation & Premature Failure
  • Delivers Enough Fuel To Support Up To 800HP
  • Can Be Mounted In Place Of Your Charcoal Canister (If Equipped, Requires Re-Routing Of Charcoal Canister)
  • Includes (1) Sump Tank Assembly, (1) 340 L/PH Fuel Pump, (1) 30 Micron Inline Fuel Filter, Fuel Regulator, 0-15 Fuel Pressure Gauge, 0-100 Fuel Pressure Gauge, 5' Of EFI -06 Fuel Hose (Push Lock), Fittings To Connect Tank To Throttle Body
  • Installs In Approximately 2-3 Hours With Basic Hand Tools
  • 1-Year Parts Warranty
 
Vintage Wheel Works V48 Mini Lite Style Aluminum Wheels - Give your AMC the classic look of the Mini Lite AMC SCCA Trans Am racing wheels. These wheels are available in 16" and 17" and will fit the front & rear of 1968-1970 AMX, 1968-1974 AMC Javelins. Using our recommended tire sizes will maintain speedometer accuracy for factory speedometer gears. Other AMC applications will require measurement to ensure fitment (some applications may require minor fender modifications). NOTE: Please measure before ordering as mounted wheels are not-returnable. Tires, valve stems, locking lug nuts, mounting & balancing, & tape on wheel weights not included. Wash with mild detergent, use mag wheel polish designed for aluminum wheels.
   
  • 1-Piece Cast 356T6 Aluminum (16x8")
  • 2-Piece Cast 356T6 Aluminum (17x8")
  • Media Blasted Center with Machined Lip
  • Includes Mag Style Nuts & Center Caps
  • Warranty: 1 Year Manufacturer
  • Balancing Required: Lug Centric Through The Lug Holes, Tape On Weights Recommended
  • Sold Individually
  • 16x8" One Piece Cast Aluminum - 21 Lbs. - Recommended Tire Size: 245x50x16
  • 17x8" Two Piece Cast Aluminum - 23 Lbs. - Recommended Tire Size: 245x45x17
 
B/G Rod Works Rodder Aluminum Wheels - These stylish 1-piece cast aluminum wheels, from B/G Rod Works are sure to dress up your classic AMC...at prices you can afford. The 17x7" & 18x7" will fit the front & rear of 1971-1974 AMC Javelins. Using our recommended tire sizes will maintain speedometer accuracy for factory speedometer gears. Other AMC applications will require measurement to ensure fitment (some applications may require minor fender modifications). NOTE: Please measure before ordering as mounted wheels are not-returnable. Tires, valve stems, locking lug nuts, mounting & balancing, & tape on wheel weights not included. Wash with mild detergent, use mag wheel polish designed for aluminum wheels.
 
  • 1-Piece Cast Aluminum
  • Silver with Machined Lip
  • Includes 60 Degree Conical Seat Lug Nuts & Center Caps
  • Warranty: Limited Lifetime (Structural), 1-Year (Finish), 90-Day (Out Of Round)
  • Balancing Required: Lug Centric Through The Lug Holes, Tape On Weights Recommended
  • Sold Individually
  • 17x7" 20 Lbs. - Recommended Tire Size: 245x45x17
  • 18x7" 24 Lbs. - Recommended Tire Size: 245x40x18
  • 1-Piece Cast Aluminum
  • Triple Chrome Plated
  • Includes 60 Degree Conical Seat Lug Nuts & Center Caps
  • Warranty: Limited Lifetime (Structural), 1-Year (Finish), 90-Day (Out Of Round)
  • Balancing Required: Lug Centric Through The Lug Holes, Tape On Weights Recommended
  • Sold Individually
  • 17x7" 20 Lbs. - Recommended Tire Size: 245x45x17
  • 18x7" 24 Lbs. - Recommended Tire Size: 245x40x18
 
 
B/G Rod Works Old School Aluminum Wheels - These stylish 1-piece cast aluminum wheels, from B/G Rod Works are sure to dress up your classic AMC...at prices you can afford. The 17x7" & 18x7" will fit the front & rear of 1971-1974 AMC Javelins. Using our recommended tire sizes will maintain speedometer accuracy for factory speedometer gears. Other AMC applications will require measurement to ensure fitment (some applications may require minor fender modifications). NOTE: Please measure before ordering as mounted wheels are not-returnable. Tires, valve stems, locking lug nuts, mounting & balancing, & tape on wheel weights not included. Wash with mild detergent, use mag wheel polish designed for aluminum wheels.
 
  • 1-Piece Cast Aluminum
  • Gun Metal with Machined Lip
  • Includes: 60 Degree Conical Seat Lug Nuts & Center Caps
  • Warranty: Limited Lifetime (Structural), 1-Year (Finish), 90-Day (Out Of Round)
  • Balancing Required: Lug Centric Through The Lug Holes, Tape On Weights Recommended
  • Sold Individually
  • 17x7" 20 Lbs. - Recommended Tire Size: 245x45x17
  • 18x7" 24 Lbs. - Recommended Tire Size: 245x40x18
  • 1-Piece Cast Aluminum
  • Triple Chrome Plated
  • Includes: 60 Degree Conical Seat Lug Nuts & Center Caps
  • Warranty: Limited Lifetime (Structural), 1-Year (Finish), 90-Day (Out Of Round)
  • Balancing Required: Lug Centric Through The Lug Holes, Tape On Weights Recommended
  • Sold Individually
  • 17x7" 20 Lbs. - Recommended Tire Size: 245x45x17
  • 18x7" 24 Lbs. - Recommended Tire Size: 245x40x18
 
 

Champion Cooling - High Performance Aluminum AMC Radiators - These high efficiency all-aluminum performance AMC radiators will end your cooling problems at a fraction of the weight & cost of brass copper radiators! This puts more money in your pocket. Each radiator includes a 16 lb radiator cap, a brass petcock valve, a transmission oil cooler, and an industry leading limited lifetime manufacturer warranty. Actual AMC appplications shown.

 

Affordable Performance Aluminum Radiators Dual 12" Electric Cooling Fans w/Shroud Stainless Overflow Tank
     
  • 100% All Aluminum Tanks, Fittings, & Billet Fill Neck, 100% TIG Welded Seams, Brazed Core, & No Epoxy or Sealers
  • Cools 40% Better & 50-75% Lighter Than Copper Brass Radiators
  • 2 Row (Supports Up To 600HP), 3 Row (Supports Up To 800HP), or 4 Row (Supports Up To 1,000+HP)
  • Down Flow Style w/ High Effiency 14-16 Louvered Fins Per Inch
  • Includes 16 Lb. Radiator Cap, Brass Petcock Valve & Automatic Transmission Cooler
  • Core Dimensions (H x W): 16" x 24 5/8"
  • Overall (H x W): Dimensions 27 1/2 x 20 3/4
  • Hose Locations: In: Passenger / Out: Driver
  • Hose Fittings: In: 1 1/2" Out: 1 1/2"
  • Trans Cooler: 1/2-20 Straight Tread, G 1/4
  • Mounting Type: Bracket Mount
  • Manufacturer Warranty: Limited Lifetime
  • Fits 1958-1974 AMC Ambassador, 1968-1970 AMC AMX, 1968-1974 AMC Javelin/Javelin AMX, 1971-1978 AMC Matador, 1979-1983 AMC Spirit, 1980-1983 AMC Concord, 1980-1988 AMC Eagle

NOTE: Overflow hose routes on passenger side. Longer hose & custom routing required if using an overflow tank. Drilling of radiator core support required. Factory fan shroud may not work without drilling & custom foam sealing radiator to fan shroud. 3 & 4 core verions may not clear aftermarket clutch fans, aftermarket Sanden A/C compressors, & aftermarket serptentine drive systems. These applications may require using dual electric cooling fans & fan shroud.

 
American Performance Products is proud to annouce we are authorized dealer for ACC Auto Custom Carpets, Legendary Auto Interiors, and Control Freak Suspension Systems. American Performance Products ofers their complete line of AMC products so please call us to order today at 1-321-632-8299! And remember, we stand behind EVERYTHING we sell with our industry leading iron clad guarantee!

Click Image To View Complete AMC PDF Catalog

Click Image To View Complete AMC PDF Catalog

 

Deluxe AMC Wrinkle Black Finned Aluminum - We offer a complete line of show quality wrinkle black emblem valve covers...if you don't see it, please call 1-321-632-8299Lightweight Finned Aluminum

  • Wrinkle Black Finish
  • Stock Height
  • Show Quality Emblems
  • Includes Cork Gaskets & Stainless Hex Or Allen Bolts
  • Fits 1967-1991 AMC V-8 Engines

AMC 390 Emblem

AMC 343 Emblem

AMC 290 Emblem

AMC American Motors Emblem

AMC V-8 Emblem

AMC American Motors Emblem

AMC Gremlin Emblem

AMC Javelin Emblem

Cork Valve Cover Gaskets
w/Stainless Hex Bolts

   
 

Deluxe AMC Chrome Steel Valve Covers - We offer a complete line of show quality chromed steel emblem valve covers...if you don't see it, please call 1-321-632-8299.

  • Stamped Steel
  • Triple Chrome Plated
  • Stock Height
  • Show Quality Emblems
  • Includes Cork Gaskets & Stainless Hex Or Allen Bolts
  • Fits 1967-1991 AMC V-8 Engines

AMC AMX Emblem

AMC AMX Emblem

AMC 360 Emblem

Cork Valve Cover Gaskets
w/Stainless Allen Bolts

Cork Valve Cover Gaskets
w/Stainless Hex Bolts

 
 

Deluxe AMC Polished Finned Aluminum - We offer a complete line of show quality polished finned emblem valve covers...if you don't see it, please call 1-321-632-8299.

  • Lightweight Finned Aluminum
  • Polished Finish
  • Stock Height
  • Show Quality Emblems
  • Includes Cork Gaskets & Stainless Hex Or Allen Bolts
  • Fits 1967-1991 AMC V-8 Engines

AMC 390 Emblem

AMC 343Emblem

AMC 290 Emblem

AMC V-8 Emblem

American Motors Emblem

AMC Gremlin Emblem

Cork Valve Cover Gaskets
w/Stainless Allen Bolts

Cork Valve Cover Gaskets
w/Stainless Hex Bolts

 
 

Show Quality Emblems - Re-painting or restoring your AMC / Jeep? Add our show quality emblems for the finishing touch. We offer a complete line of show quality emblems...if you don't see it, please call 1-321-632-8299

  • Show Quality Emblems
  • Correct Size, Colors & Finish
  • Die Cast Aluminum Or Plastic, As Original
  • Sold Individually, Clips Sold Separately

  • 2-Required
  • Original Equipment For 1971-1973 Javelin, AMX, Ambassador, & Matador
  • Retrofit To ANY 401 AMC
  • P/N 448-8242
  • Uses Clip 1335 (Sold Separately)

  • 2-Required
  • Original Equipment For 1970 Javelin, AMX, Ambassador, Rebel (Except Machine)
  • Retrofit To ANY 390 AMC
  • P/N 448-7428
  • Uses Clip 1335 (Sold Separately)

 

  • 2-Required
  • Original Equipment For 1968-1969 Javelin, AMX, Ambassador, Rebel & 1969 SC/Rambler
  • Retrofit To ANY 390 AMC
  • P/N 448-5317
  • Uses Clip 1335 (Sold Separately)

 

  • 2-Required
  • Original Equipment For 1970-1971 Javelin, AMX, Ambassador, Rebel & Matador
  • Retrofit To ANY 360 AMC
  • P/N 448-7279
  • Uses Clip 1335 (Sold Separately)

 

  • 2-Required
  • Original Equipment For 1968-1969 AMX, Javelin, Ambassador, Rebel
  • Retrofit To ANY 343 AMC
  • P/N 448-5160
  • Uses Clip 1335 (Sold Separately)

 

  • 2-Required
  • Original Equipment For All 1970-1971 304 Powered Vehicles
  • Retrofit To ANY 304 AMC
  • P/N 448-1530
  • Uses Clip 1335 (Sold Separately)

 

  • 2-Required
  • Original Equipment For 1957-1962
  • Retrofit To ANY AMC V-8
  • P/N 448-5385
  • Uses Clip 1335 (Sold Separately)

 

 

  • 1-Required
  • Original Equipment Grille Emblem For 1968-1969 AMX
  • Retrofit To ANY AMX
  • P/N 448-5320

 

  • 1-Required
  • Original Equipment Grille Emblem For 1970 AMX
  • Retrofit To ANY AMX
  • P/N 448-8043

 

  • 2-Circles (P/N 448-7429) & 2 Emblem Sets Required (P/N 448-9497)
  • Original Equipment Emblems for 1970 AMX
  • Retrofit To ANY AMX

 

  • 2-Quarter Circles (P/N 448-5319) & 2 Emblem Sets Required (P/N 448-5176)
  • Original Equipment Emblems for 1968-1969 AMX)
  • Retrofit To ANY AMX

 

  • 1 Required
  • Original Equipment Grille Emblem For 1969 Ambassador
  • Retrofit To ANY Ambassador

 

  • Rear Body Panel Bulls Eye
  • P/N 812-2067
  • Original Equipment Emblem For 1973-1974 Javelin & Javelin AMX
  • Retrofit To ANY AMC

 

  • Quarter Panel Bulls Eye Emblem
  • P/N 448-6456
  • Original Equipment Emblem For 1968-1974 Javelin
  • Retrofit To ANY AMC

 

  • Gremlin Fender Emblem - 2 Required
  • P/N 448-GRM1
  • Original Equipment Emblem For 1970-1972 Gremlin
  • Retrofit To ANY Gremlin
  • Necklace Also Available (P/N 448-GRM2)

 

 

  • Grille Emblem (P/N 448-5311)
  • Orignal Equipment For 1968-1970 Javelin
  • 8 3/4" Long Retrofit To ANY Javelin
  • Made In The USA

 

  • Hood & Quarter Panel Emblem (P/N 448-5833)
  • Orignal Equipment For 1968-1974 Javelin

 

  • Trunk Lid Emblem (P/N 448-5833)
  • Orignal Equipment For 1970-1974 Javelin
  • Retrofit to ANY Javelin

 

  • 2 Required (P/N 448-5012)
  • Orignal Equipment For 1968-1972 Javelin
  • Retrofit To ANY Javelin

 

  • Fedner & Rear Body Emblem (P/N DEC 1969)
  • Orignal Equipment For 1969 Ramblers
  • Retrofit To ANY Ramblers
  • NOTE: SC/Ramblers Factory Broke Off The Red/White/Blue Section For Use On Fenders

 

  • 2 Required (P/N 448-CARDIN)
  • Orignal Equipment For 1972-1973 Javelin & Javelin AMX w/Pierre Cardin Option
  • Retrofit To ANY Javelin

 

     

High Performance V-8 Coil

  • Improves Combustion Efficiency w/40,000 volts
  • Show Quality Triple Chrome Plating
  • Fits 1967-1991 AMC V-8 Engines
  • 50 State Legal (C.A.R.B. E.O. #D-57-10)
  • 90 Day Limited Manufacturer Warranty

Chrome Plated Steel Radiator Cap

  • Show Quality Triple Chrome Plated Steel
  • 15 Lb. Pressure Rating
  • Fits 1967-1991 AMC V-8 Engines

Chrome Plated Steel Thermostat Housing

  • Show Quality Triple Chrome Steel
  • Includes Gasket & Stainless Hardware
  • Fits 1967-1991 AMC V-8 Engines

Chrome Plated AMC Model 20 8.875" 12 Bolt Differential Cover

  • Show Quality Triple Chrome Plated Steel
  • Stock Fluid Capacity w/No Drain Plug
  • Fits AMC Model 20 8.875" Differentials
  • Includes Cork Gasket & Stainless Hardware

Fiberglass Seat Backs

  • Good Quality Reproduction
  • Similar Grain To Factory
  • Includes Chrome Trim (Not Shown)
  • Black Fiberglass, Paint To Match, Sold As Pairs
  • Fit 1970-73 Javelin/AMX, Ambassador, Rebel, & 1971-1976 Gremlin

 

 
nnn


footerimage Back to Top All Content ©2016 American Performance Products none american performance
design by jdgimzek.com
none